In this document

  1. Specifications
  2. Description

This page has been updated on the 11 April 2010.


Processor ARM 11 running at 500 MHz
Ram 64 Mbytes
NAND Flash 256 Mbytes
Power Supply
External Power Supply 8-32V
Li-ion battery charger Yes
Li-ion battery Option (900 mA.h)
Quad-band GSM/GPRS Module Yes
GSM antenna External
GPS receiver Yes
GPS antenna External
Interface & Telematics features
USB (2.0 Host/Slave) powered (limited to 350 mA on 5V) when
connected to external power
not powered on internal battery
Input Ignition (active high) alarm (active low)
and 1 input active low.
Output 2 (active low 300mA driving current )
3D Accelerometer ±2g, ±8g
3 axis Gyroscope Please contact us
1-wire Yes
LEDs 2
Connectors microFIT 8 pins
Fakra connectors (antennas)

Operating temperature (w/o battery) -20/+60°C
Dimensions 64 × 66.5 × 22
SIM card 1 slot


Note: To open the device, push up the back cover (see 7.) with a screw driver and release it. Remove the internal battery to access to the other components.

1. GSM connector
2. GPS connector
3. USB host
4. microFIT 8 pins
5. LEDs

6. Internal battery switch
7. Opening hole
8. USB clip

Switch positions:
Outwards (I) → Enable the battery
Inwards (O) → Instantaneously disable the battery.

Note: Internal battery activation requires the device to be running for at least 10s on the vehicle’s power.